Infinicyt™: Change Log

Home

Change Log

Change Log

Infinicyt^TM versions		What´s New
Infinicyt™ 1.6. Read more... General Cytognos reagents’ profiles available Open files by Drag & Drop Manual Analysis and Calculate Data modules integrated Improved application performance Main Screen, Report and Profile Configuration window user defined position and size are maintained in all sessions Manual Analysis New density representations: Linear and Probabilistic Error events are shown as part of population tree total events Analysis Strategy “Save as Current Strategy” option included in “Save Analysis Strategy” dialogue box Gate strategies are adjusted automatically to new files if small differences are detected Reference Image Reference Image is applied separately to each band in File Number DotPlots Diagrams New pop-up menu to select parameters Report Possibility of choosing different dates Calculate Data Non-calculated events accessible using Population Tree right-click menu Batch Analysis Compass Tool BCR-ABL BCR-ABL module included in the Basic version Infinicyt™ 1.6.0b (check changes) Module “General" . Bug detected when merging two groups in the previous groups dictionary. Merging to groups in the previous groups dictionary with the same name could not be performed. Module “Manual Analysis” . Bug detected in APS diagram when changing current file. The APS diagram did not take all parameters from a new file if it had more parameters than the previously opened one. Module “Manual Analysis” . Bug detected in virtual parameters dependent visibility statistics. Gates performed on a diagram with a virtual parameter which is dependent on partial visibility statics gave incongruent results. Module “Manual Analysis” . Bug detected in statistics of files merged without complete parameter information. Statistic values from the Population Tree took in consideration events without complete parameter information. Observed in “Population Files" "All Files". Module “Manual Analysis” . Bug detected when copying several times the same population. The same population copied repeatedly would appear in different places of the Population Tree. Module “Compass" . Improvement performed when selecting populations to calculate. A population can now be added to the Compass even if it was not calculated and the user will be warned about this information on the Compass diagram. Module “Compass" . Improvement performed when using relevant comparative button. Relevant comparatives are now actualised every time a group is made visible if the relevant comparative button is pressed. Module “Compass" . Improvement performed in dialog when importing databases. Dialog that appears when trying to import a database with file extension different from .dcf is now more explanatory./li> Module “Compass" . Improvement performed in database export button. Export database button is now disabled if there are no databases created. Module “Compass” . Bug detected in Box Plot diagram when changing case colour. The Box Plot diagram did not change its appearance if the colour of a case was modified inside Compass Edition module. Module “Compass" . Bug detected while assigning non-calculated events. Assigning non-calculated events to population with calculated events would in rare occasions cause discrepancies in the Compass diagram. Module “Compass" . Bug detected when deleting a population with events in Compass. Discrepancies were observed in Compass if the action of deleting a population from the Population Tree was undone. Module “Batch Analysis" . Bug detected when duplicating a Batch name. Batch name could be duplicated from the Batches Manager. Module “Merge” . Bug detected when going to Manual Analysis with an unsaved merge file. Unsaved merge file was not recovered if after going directly from File Merge module to Manual Analysis the user tried to open an analysed file refusing to change profiles. Module “Calculate” . Bug detected when grouping parameters. Calculate wizard steps panel collapsed when grouping parameters. Module “BCR.ABL”. Bug detected when returning from the last wizard step. Parameters configuration was lost when returning from the last wizard step.
Infinicyt™ 1.5. Read more... General Default configuration recovery Access to Default profile Reduction of Calculate process time Introduction of actions by command line Manual Analysis Improvements in loading strategies 2.2. Improvements in file selector window Reference Image Merge Controls cancellation Import/Export compensations Diagrams New Population Band diagrams Label configuration Changes on BoxPlots New options for Histogram configuration Export Diagrams to image format New dialog for the parameter selection in Multiparametric diagrams “Tile” Population New usability functions Additional options in the statistics menu Report Selection of “Population Files” in the Report Copy/Paste from Manual Analysis to the Report Component “Population” Export to PDF Export Report components to image Multiple selection of FCS parameters within the component “Data” File Merge APS Infinicyt™ 1.5.0i (check changes) Module “General” . Improvement performed on exiting modal dialogs. Modal dialogs can now be closed using the ESC key. Module “General". Improvement performed on reference images configuration. Options related to reference image are now enabled or disabled according to the diagram where they are being configured. Module “General”. Improvement performed on ALT key direct access. ALT.key menus direct access works now better. Module “General” . Bug detected while cancelling profile change. A new dialog window would appear asking to change file after the action of changing the current profile action was cancelled. Module “General” . Bug detected while moving a parameter to another group in the previous groups configuration. Changing a parameter to another group would make that the first one would disappear. Module “Manual Analysis” . Improvement performed on Analysis Manual menu visualisation. Manual Analysis menu reorders itself while resizing the window thus being always visible. Module “Manual Analysis” . Improvement performed on unloading strategy. Infinicyt now shows a loading bar whenever the unloading strategy takes more than a few seconds. Module “Manual Analysis”. Improvement performed on negative visibility configuration. Negative visibility can now be configured using the arrow keys after clicking on any parameter slider bar. Module “Manual Analysis" – Improvement performed on the tile function. Diagrams are now better organised when there are too few or too many number of diagrams. Module “Manual Analysis” – Bug detected while displaying information dialogs over the Manual Analysis window. Information dialogs over Manual Analysis window were trimmed when the frame was at screen limit. Module “Manual Analysis” . Bug detected while renaming groups in previous groups configuration. Two groups from the previous groups dictionary could present the same name without any warning of doubled name. Module “Manual Analysis” . Bug detected while overwriting compensation. Two different compensations could be named the same if they had different lasers. Module “Manual Analysis” . Bug detected while saving a reference image with the same name as a previously existing one. Saving a reference image with the same name as a previous one gives a warning to verify overwriting. The reference image was overwritten if this dialog was cancelled using the close button. Module “Manual Analysis” . Bug detected while moving populations with the mouse. Sometimes the user would be able to move a population within the Population Tree using the right.click mouse button. Module “Manual Analysis” . Bug detected while assigning events to a population using diagrams right.click menu. Assigning events to a particular population using the diagrams right.click menu was sometimes not possible when the Population Tree add a high number of populations because not all of them could be displayed. Module “Manual Analysis” . Bug detected while applying the Ctrl.Z action after configurating APS parameters. APS configuration could not be undone using the Ctrl.Z action Module “Manual Analysis” . Bug detected while copying and pasting populations in the Population Tree. Populations would appear twice while they were being copied and pasted within the Population Tree. Module “Manual Analysis”. Bug detected while loading a file after one with a single parameter. Default diagrams would appear twice in a file with more parameters if it was loaded after one with a single parameter. Module “Manual Analysis" . Bug detected when copying a population. A population could be copied into its grandchild making that the software would crash. Module “Manual Analysis" . Bug detected while selecting the automatic negative visibility. Selecting automatic negative visibility configuration would not be saved when the dialog configuration is reopened. Module “Manual Analysis". Bug detected while unchecking all populations in the Population Tree. A diagram would sometimes not repaint itself if all populations where made invisible. Module “Manual Analysis" . Bug detected while using the Apply Default option in diagrams. Events visibility and density do not change properly while using the Apply Default option to diagrams. Module “Merge” . Bug detected while unchecking a parameter. Customised group name (previous groups dictionary) would lose their last letter when unchecking that particular parameter. Module “Merge”. Bug detected when ungrouping parameters. Parameters could not be ungrouped using File Merge module parameter matrix. Module “Merge” . Improvement performed on the Controls window Population Differences tab visualisation. A scroll has been added to the Population Differences tab when there are a high number of parameters. Module “Merge” . Bug detected when going to Manual Analysis with an unsaved merge file. Unsaved merge file was not recovered if after going directly from File Merge module to Manual Analysis the user tried to open an analysed file refusing to change profiles. Module “Calculate". Bug detected while unchecking all parameters from the merge matrix. Software could crash if all parameter from the merge matrix where unchecked and the process was approved pressing the Next button. Module “Report”. Bug detected while resizing a component. A report component would be displaced after resizing. Module “Report”. Bug detected while configuring an APS diagram in files with only one parameter. APS diagrams could not be configured correctly when the current file only had one parameter. Module “Report” . Improvement performed on disabling forbidden options in report diagram component. Options that cannot be applied to a particular diagram are now disabled according to the diagram selected. Module “Report" . Improvement performed on exporting and printing a report. Options related to exporting and printing a report are now enabled or disabled according to the configured report. Module “Editor" . Bug detected while reopening the same file. A file with the same name as the previously open would be opened in the File Editor module with non.actualised configurations. Module “BCR.ABL". Improvement performed on combo of beads parameter.Unchecked parameters in merge table do not appear anymore in beads parameter combo list. Infinicyt™ 1.5.0h (check changes) Module “General”. Improvement of “error params” message on opening. When during the Infinicyt opening, is shown the message “The params file is not correct. It is from a newer version of the software”, the error code is not shown beside the text of the message. In other cases, the message is not the correct one. Module “General”. Improvement when changing negative visibility configuration. Now you can use the keyboard to change negative visibility configuration with the slider. Module “General”. Bug when displaying the Infinicyt icon on “Programs and Features” option on “Control Panel” of Windows Vista/7. For 64 bits Infinicyt versions, the icon is not displayed on "Programs and Features" dialog on "Control Panel" of Windows Vista or Windows 7. Module “General”. Bug when opening Manual Analysis. When there is a file opened in Manual Analysis and it is closed, if the user clicks on "Manual Analysis" button in main screen of Infinicyt, it reopens the previous file and displays the "Open File ..." dialog to select another one. Module “General”. Bug when displaying message when a required field is not present in the FCS file. When the BYTEORD field is not present in the FCS file, the error message displayed is not correct because indicates that DATATYPE field is not present. Moreover, the message displayed in Infinicyt is not correct when the MODE field or the DATATYPE field is not present. Module “Manual Analysis”. Improvement when editing statistics in Profile Configuration. When the user adds (to be shown) new statistics in Profile Configuration Dialog, the Population tree won't be refresh until the user confirms the changes. Module “Manual Analysis”. Improvement of the Statistics Parameters configuration. If the user opens the configuration of a statistic parameter, which is referenced by a virtual parameter, and then closes it by clicking on the "Ok" button (without making any change), it displays a unnecessary message. Module “Manual Analysis”. Improvement when displaying dialogs. Improvement when displaying dialogs near the limits of the screen that avoids them to be cut. Module “Manual Analysis”. Improvement when displaying APS graphic. Improvement on the time takes to calculate the APS graphic when one ".txt" file with too small values is opened. Module “Manual Analysis”. Improvement when displaying labels color in Band graphics. If the color of the label is too similar to the color of the back-end of the graphic or too similar to the color of the events displayed on graphic, the label is displayed with a border in the opposite color of the label color. Module “Manual Analysis”. Improvement in labels configuration. It is possible to configure a label without any visualization (fluorescence, marker, etc.). Module “Manual Analysis”. Improvement on Previous Groups. It is possible to rename the groups defined on dictionary. Module “Manual Analysis”. Improvement when displaying “3D density” graphics. Improvement the time used by Infinicyt to display the "3D density" graphics with means and medians over a file with multiple tubes. Module “Manual Analysis”. Bug Infinicyt hangs when a virtual parameter is displayed in a graphic. When a virtual parameter is displayed in a graphic and the user deletes it, then if the user makes a "CTRL + Z" and "CTRL + Y", Infinicyt hangs. Module “Manual Analysis”. Bug when editing compensation. If the statistics are displayed in Population tree and the user tries to edit compensation data, Infinicyt gets hang and does not recover to the normal state. Module “Manual Analysis”. Bug when applying stored compensation. If the compensation stored contains, for every parameter, the name of lasers and markers and the user tries to apply that compensation to other files with the same parameters but without markers, the compensation cannot be apply. Module “Manual Analysis”. Bug when applying Negative Visibility on a graph. When the parameters of a graph have been fixed over a file, and then, another file is opened with different parameters and user modifies the negative visibility over this graph, it is not applied because correspondence is not possible to be set between the old parameters to the new parameters. Module “Manual Analysis”. Bug when configuring Negative Visibility. When Negative Visibility is configured in automatic mode and then, if a parameter is configured with local visibility it causes that the negative visibility of the rest of parameters is modified. Module “Manual Analysis”. Bug when assigning events to a new population. When the user makes a gate and then creates a new population on Population tree, on which assigns the events selected by the gate, the events are displayed behind the Events population on all graphics. Module “Manual Analysis”. Bug when displaying APS after reset an analysis. When an analysis, made with an APS diagram, is reset, and then, this action is undo (CTRL+Z), the APS does not take the same visualization because it is not calculated over the same events. Module “Manual Analysis”. Bug when creating diagrams with two screens. When the screens order on hardware is not the same as the screens order on Windows, and the user creates new diagrams, these appear on secondary screen (on Windows), not in main screen. Module “Manual Analysis”. Bug when editing virtual parameters. When a virtual parameter depends on a statistic parameter, and the user deletes this last one, the virtual parameter does not appears in red color unless the user configures it or re-opens the Profile Configuration dialog. Module “Manual Analysis”. Bug when changing the all labels color. If the user tries to configure the all labels color with the default color of one label, the changes has no effect because the new color is the same as the default color. Module “Manual Analysis”. Bug when displaying current tab on label configuration dialog. If the user select a different option in label configuration dialog (eg. from the Parameters option to the Populations option), the tab selected currently change to the "Text" tab. Module “Manual Analysis”. Bug when editing the label configuration in a graphic. The configuration of a label inside a graphic is associated to an axis, ie, if the user configures the label A located in the X axis (the B label is located in the Y axis) and inverts the axes, then, the label B takes the configuration done on the label A and vice-versa. Module “Manual Analysis”. Bug when exporting statistics. If the export settings have been made with "representation by tube" and the user tries to apply it to a file with one tube, Infinicyt throws an error message. Module “Manual Analysis”. Bug when deleting and renaming the reference images. When there are two references images (eg. "A" and "B"), and the "A" reference image is deleted and, then, the "B" reference image is renamed to the "A", it provokes that the original "A" reference image continues and the original "B" reference image disappears. Module “Report”. Improvement of the cancel process on Diagram's edition. If the Diagram edition process is canceled or closed, a "loading" window is displayed (although there are no changes to be applied) and a flickering is produced over the diagram. Module “Report”. Bug when displaying “New Component” dialog. When the "New Component" dialog is displayed, the user can continue working with the rest of components. Module “Report”. Bug when copying graphic from revision to report. If the user closes all the graphics of the manual analysis and opens a graphic associated with a revision, then if copies it to the report, the graphic does not displayed correctly. Module “File Merge”. Bug when making Drag&Drop between components of different types. If the user drags an element from the Files List and drops it in the Parameter table, the application throws an exception. The same is true in reverse. Module “Export”. Bug when applying the stored compensation after exporting. If the user exports a file, opens this new file and saves the compensation. Then if the user reopens the original file and tries to apply the stored compensation, it is not possible because the stored compensation is not compatible with the file (the name of the lasers does not match). Module “Export”. Bug when exporting to TXT. When a FCS file is exported to a ".txt" file, the name of marker associate to fluorochrome is lost. Module “Export”. Bug when modifying PnR value When the user changes the PnR value of a parameter and then, clicks on "Save As ..." or "Manual Analysis" button, the new value does not take effect. Infinicyt™ 1.5.0g (check changes) Module “General”. Improvement clicking main window buttons. Sometimes, the user needs to click twice on the main window buttons. This might be caused by a small movement between the time the button is pressed and released. Module “General”. Review of literals in the Infinicyt English version. The literals for multiple dialogs, messages and graphics in the Infinicyt English version have been reviewed and corrected where needed. Module “General”. Bug opening files by double click on Windows. When the name of a file contains white spaces, and the user makes a double click to open it (with Infinicyt opened), Infinicyt allows the user to decide between opening the file in the same window, or in a new one. If the user selects the first option, Infinicyt does not open it. Module “General”. Bug opening CYT file with double click. When user makes double click over a CYT file, and its name or its path contains blanks, Infinicyt does not open the file. Module “Manual Analysis”. Improvement opening TXT files with exponential notation. Infinicyt can now open TXT files in which the values are in exponential notation (ex. 0.865E-3 or 1.235E2). Module “Manual Analysis”. Improvement editing label. Now it is possible to define an empty text for a custom label. Module “Manual Analysis”. Bug displaying default profile with two screens. When user uses two screens with different resolutions and the default profile is loaded, diagrams are placed on a wrong position and not sized properly. Module “Manual Analysis”. Bug loading strategy. When a strategy is about to load, and the current analysis has not been saved, Infinicyt allows the user to save it. If the user decides to save, and then cancels the process in the “Save as…” dialog, the selected strategy is loaded, when the process should have been cancelled instead. Module “Manual Analysis”. Bug displaying “Statistics” configuration dialog. When the user defines a statistic with a large name, the list is scrolled to the right side, making the other statistics disappear from the view. Moreover, the visualization of this dialog is not correct when it is maximized. Module “Manual Analysis”. Bug getting to front diagrams in “Review”. When any diagram included in the manual analysis is minimized and the user selects a step of the review which includes it, the diagram does not maximize. Module “Manual Analysis”. Bug with the checks of visibility for "Reference Image" in Population tree. When the user checks or unchecks the visibility of a population which includes a reference image, the visibility of that reference image does not change. Module “Manual Analysis”. Bug with global visibility check in Population tree. When the user unchecks any population visibility in Population tree (ex. “Events” visibility), the global check does not refresh and continues checked. Module “Manual Analysis”. Bug displaying APS diagram with a TXT file. The APS diagram does not display correctly when a TXT file is opened because the PnR value is not calculated correctly. Module “Manual Analysis”. Bug with APS diagram between files with different number of parameters. When an APS diagram has been created on a file with n parameters, and a new file is opened (with m parameters, where n is not equal to m), the APS diagram does not refresh its configuration and continues calculating over the first n parameters. Module “Manual Analysis”. Bug editing compensation. When compensation is edited and the user selects the “Clear” or “Restore Original Values” options, Infinicyt prompts the user to confirm the operation. If the user closes the dialog (by pressing on the upper right corner of the dialog), the compensation is modified while the operation should have been cancelled instead. Module “Manual Analysis”. Bug saving current compensation. When the user opens a compensation configuration dialog with a current compensation loaded, and clicks on the “Clear” button, Infinicyt prompts the user to save the current compensation, which is not necessary. Module “Manual Analysis”. Bug displaying the name of lasers in compensation. When a file that contains an editable compensation has lasers without a name, the compensation configuration dialog does not display those lasers even if the compensation matrix shows its values correctly. Module “Manual Analysis”. Bug inverting the axes on a diagram. When labels are configured locally on a diagram, and the axes are inverted, the configuration of the labels does not invert too. Module “Manual Analysis”. Bug editing labels configuration. When the user opens the label configuration dialog on a diagram and makes any changes, when the dialog is closed (by clicking on the "OK" button), Infinicyt shows a message asking if the changes should be applied locally or globally. If the user closes the dialog (by pressing on the upper right corner of the window), the changes are applied instead of going back to the label configuration dialog. Module “Manual Analysis”. Bug with scroll of the “preview” field in the label configuration dialog. When a label is configured with a big font and the user opens the label configuration dialog again, the scroll of the "Preview" field is placed at the end of the text instead of the beginning. Module “Manual Analysis”. Bug refreshing the name of the file. After a “File Merge” operation, when the user goes to "Manual Analysis" and saves the resulting file of this operation, the "Manual Analysis" window does not refresh the name of this new file. Module “Manual Analysis”. Bug creating new function/virtual parameter. When, from the configuration dialog, the user creates a new function/virtual parameter that depends on another function/virtual parameter and before closing the configuration dialog, the referenced function/virtual parameter is removed, the new function/virtual parameter will be inconsistent and it won´t be possible to edit it. Module “Report”. Bug creating a text component with a large text. When a text component is created with a large text (more than 100 characters), its size is very big and is displayed out of the sheet limits. Module “Report”. Bug sitting components outside the sheet limits. When a component has been located with some of its content beyond the sheet limits, and the report is opened again, this component appears located at the top left of the sheet. Module “Report”. Bug copying a diagram with reference image configured locally. When a diagram in "Manual Analysis" which has a reference image configured locally is copied to "Report", the new diagram in "Report" might display a different reference image or no image at all. Additionally, if the correct image is displayed, the configuration will be the global one, rather than the one defined on the diagram. Module “Report”. Bug displaying text in exported PDF file. The exported PDF file does not display certain fonts correctly, even if they are displayed properly on the screen. Module “Report”. Bug with scroll of the “columns” list in the population configuration dialog. The vertical scroll of the “columns” list in the population configuration dialog moves continuously when the user selects multiple values, generating a strange effect. Module “Export”. Bug adjusting PnB and PnR in a TXT file. When the user opens a TXT file, the PnB values do not adjust to the PnR values. Also, the PnR values do not adjust to the negative values of the events. Module “Merge”. Bug grouping parameters previously edited. When there are two or more parameters whose name have been edited and are then grouped by the user, this new group has no effect in the Manual Analysis and the parameters appear ungrouped. Infinicyt™ 1.5.0f (check changes) Module “Manual Analysis”. Improvement in loading strategy warning message. Improvement in the warning message for strategy loading that is displayed when user tries to load a strategy made over a file with more than one tube, on a file with a single tube. Module “Manual Analysis”. Improvement assigning events to a population. Sometimes, you need to make a double click to assign events to a population in Population tree. Module “General”. Improvement visualization in 800x600 resolution. Improvement in dialogs visualization for a 800x600 resolution, for example, in DataSet selection dialog. Module “Manual Analysis”. Review of literals in the Infinicyt English version. Review and correction multiple literals of dialogs, messages and graphics in the Infinicyt English version. Module “General”. Bug displaying dialogs when working with two screens. When user uses two screens, the dialogs are shown always in the same screen regardless the screen in which Infinicyt is displaying. Module “Manual Analysis”. Bug saving strategy with the same name as another. When the strategy is saved with the same name as another, Infinicyt shows a dialog asking for overwriting. If user closes the dialog (by pressing on the edge of the window), the strategy is overwritten but should not do so. Module “Manual Analysis”. Bug loading strategy made over multiple tubes. Applying a strategy made over multiples tubes does not take account the concordances over every tube. Module “Manual Analysis”. Bug with TXT files without header. The name of parameters displayed on graphics includes the symbol “:” because of missing information in the file header. Module “Manual Analysis”. Bug selecting concordances. When there is no parameter for a concordance, Infinicyt selects a parameter itself instead of find a compatible parameter. Module “Manual Analysis”. Bug editing a function in Population tree. When a function is edited and user presses “CTRL + Z” and then "CTRL + Y", the result of this sequence is not the editing function. Module “Manual Analysis”. Bug refreshing population control merge. Cells color in population control merge dialog is not refreshed when user modifies control merge values. Module “Manual Analysis”. Bug opening large TXT files. Infinicyt runs out of memory when trying to open large TXT files. Module “Manual Analysis”. Bug deleting virtual parameters. If a virtual parameter is deleted from Profile Configuration dialog, and after that, user clicks the Cancel button, the virtual parameter is deleted anyway. Module “Manual Analysis”. Bug displaying selected events. The visualization of selected events does not take account the visualization configuration of the populations. Module “Report”. Improvement of printing one page. Now user can print one page of the report. Module “Report”. Bug refreshing components. When reference image is displayed in a diagram, in diagram configuration dialog, “show reference image in this diagram” is not checked, but reference image is displayed on it. Module “Report”. Bug resizing Font configuration dialog. The Font configuration dialog in Text component is not resizable. Module “Report”. Bug copying diagram from Manual Analysis with local visibility. When a diagram with local visibility (in Manual Analysis) is copied to the Report, it does not keep the visibility. Module “Report”. Bug configuring labels with local visibility. When a new diagram is configured with local visibility, labels populations configuration does not take into account such visibility. Module “Export”. Bug exporting files with different number of events. After a file exporting with n number of events (ex. 50.000) and without closing "Export" dialog, you try to export another file with more than n number of events (ex. 100.000), the number of events displayed in "Export" dialog does not change (continues with 50.000 events). Module “Export”. Improvement opening large files. A “loading” window is showed when large files are being opened. Same for module “Edit”. Module “Calculate Data”. Bug with keyboard shortcuts. The keyboard shortcuts have been defined correctly. Infinicyt™ 1.5.0e (check changes) Module “Manual Analysis”. Bug opening files with compensation. When user opens a file with a compensation and parameters without marker, Infinicyt applies it twice and events are not correctly displayed. Module “Manual Analysis”. Bug modifying compensation matrix. In a clear compensation matrix if user changes a compensation value and then clicks with mouse in other different cell, value will be assigned to another cell of the matrix. Module “Manual Analysis”. Bug in compensation with invalid data. When compensation has non selected data in "Data Set", it can be applied with bad results. Module “Manual Analysis”. Change deleting population process. A “Loading” message has been introduced during delete populations process. Module “Manual Analysis”. Bug in strategies over APS. When a strategy has been made with gates over APS, result of applying that strategy in the same file is not the same as initial result. Module “Manual Analysis”. Bug setting strategy as current strategy. When a strategy is set as current strategy, and user overwrites and sets it as non current strategy, strategy keeps as current strategy. Module “Manual Analysis”. Bug in “Review”. When user reviews a population with one gate and assigns it to another population (without events), and then clicks over review icon of second population and cancels all changes. Review icon appears in population that has no assignment. Module “Manual Analysis”. Bug undoing delete first step of "Review". When the first step of review population is deleted, the undo action does not work properly. Module “Manual Analysis”. Bug modifying name of reference image in Profile configuration. User can modify a reference image name and use the same name as other. Module “Manual Analysis”. Bug resizing gates in graphics. When user resizes a gate in a graphic, the gate changes its position Module “Manual Analysis”. Bug copying profile label configuration to program label configuration. Program label configuration does not change when user copies profile label configuration to it. Module “Manual Analysis”. Bug configuring scale in graphics without scale. User can configure scale visualization in graphics that do not have scale. Module “Manual Analysis”. Bug editing labels. In label configuration dialog, when “custom label” checked, preview area is not updated when switching between “All” and “Parameter” with. Module “Manual Analysis”. Label configuration preview improvement in graphics. Improve the time to refresh the preview of label configuration in graphics. Module “Manual Analysis”. Bug cancelling “control merge” process. If user cancels the process “control merge” very quickly, program throws an internal exception. Module “Report”. Bug painting long label in Box Plot. There is a length limit when painting a label on a Box Plot. Module “Report”. Bug configuring reference image in diagram. When reference image is displayed in a diagram, in diagram configuration dialog, “show reference image in this diagram” option is not checked, but reference image is displayed on it. Module “Report”. Bug displaying “Add FCS Info” dialog in “Data” component. “Add FCS Info” dialog rows height change when user checks one of the parameter. Module “Report”. Bug configuring diagram with N parameters. When a diagram is configured with N parameters and a file with less than N parameters is opened, if user tries to configure this diagram, “Not available” message is displayed but configuration dialog shows all N parameters. Module “Report”. Bug in “Date” component configuration dialog tittle. The title of configuration dialog of the “Date” component is wrong. Module “Report”. Bug deleting component after undoing sheet deletion. After undoing sheet deletion, the deletion of a component including in that sheet does not work properly. Module “Export”. Bug with PnE Format. Changes on PnE format in export file has no effect. Module “Export”. Bug exporting files with compensation. When a file is exported with internal compensation and user tries to open it, the result is not the same as original file. Module “Export”. Bug moving mouse over “only visible population”. If user changes events number to export, and moves the mouse over the “only visible populations” check, events number changes automatically to all events. Module “Editor”. Bug including parameter in “anonymous” option. When user saves a file with the “Anonymous” option checked, the final file will include all parameters and not only the parameters selected. Module “Editor”. Bug displaying “anonymous” option dialog. The rows height of the “anonymous” dialog change when user checks one of the parameter. Module “Calculate Data”. Bug painting non-calculated events in Population Band graphic. In Population Band graphics the non-calculated events are painted in all bands, and not only for populations which have non-calculated events. Infinicyt™ 1.5.0d (check changes) Module “General”. Version included in text area of "About Infinicyt" window: Infinicyt version is shown in the information text area of the “About Infinicyt” window. Now, users are allowed to copy all necessary information to inform Infinicyt Technical Support Team which version is running. Module “General”. Not expand strategies information in the Profile configuration: When user opens “Gates and Analysis Strategies” option, in Profile configuration window, all gates and strategies information as well being expanded and do not let user to view all saved strategies. Module "Manual Analysis". Bug loading strategies or reference images: Graphics are displayed before the loading of strategy or reference image, and after that, these are reloaded with new data. Reloading process not look properly on display. Module “Manual Analysis”. Bug with pop-ups in 3D diagrams: When user make right mouse click on maximized 3D diagrams, pop-up is displayed in a different position of the mouse position. Module “Manual Analysis”. Bug in “CTRL+0” action when the current diagram is maximized: When user has a maximized diagram and executes the “CTRL+0” action, the manual analysis window is displayed to front temporally. Module “Manual Analysis”. Bug loading files containing wrong values: When the file that is being loaded contains wrong values, Infinicyt assigns 0 to these values. Module “Manual Analysis”. Bug showing statistics in Population tree: After assigning events to a population, if “undo” action is executed, the statistics of the populations do not refresh their values. Module “Manual Analysis”. Improvement of edition Comments dialog: Use all available space for the comment columns inside comments editor dialog for a population. Module “Manual Analysis”. Bug in “Reference Column” with statistics: When population used to calculate “reference column” value in statistics is deleted, this column does not update its status what leads an inconsistent profile state. Module “Manual Analysis”. Bug in export option inside Manual Analysis: When user pass the mouse over “Only visible populations” check, “Events” value fields change to max number of events. Infinicyt™ 1.5.0c (check changes) Module “General”. Bug Infinicyt hangs in Windows XP: Infinicyt hangs on start up. This problem only affects to users who work with Windows XP. Module “Manual Analysis”. Bug in gates: Occasionally, when a "gate" disappears, the selected events are no longer selected, but the gate is still appearing on screen. Module "Manual Analysis". Bug in scale configuration: Non supporting configuration scale graphics, or scale configurated by user as not visible, the “Default Font” button should be unavailable. Module “Report”. Bug in visibility of diagram: When user copies a diagram from manual analysis to report, the visibility of populations on this diagram depends from visibility on manual analysis instead of its own visibility configuration. Module “Report”. Bug in configuration dialog “Date” title: The title of configuration dialog from component “Date” shows the literal “Text” instead of “Date”. Module “Report”. Bug in configuration of component “Diagram”: When user opens dialog configuration of a Histogram diagram and modifies the type of this to a DotPlot diagram, the configuration of “Number of Events Displayed” lets us to activate “Global” and “Local” configuration at the same time. Module “Report”. Bug in creating a Histogram: When user creates a Histogram, this is not “smooth” by default against when it is created in the manual analysis. Infinicyt™ 1.5.0b (check changes) Module "General". Bug starting Infinicyt: Message displayed "The file "max=1048" doesn't exists" when Java Virtual Machine calculates memory reserved to run Infinicyt. Module "General". Bug displaying a dialog: Dialogs are displayed in a different screen in which user is working (only for users that use more than one screen). Module "Manual Analysis". Bug in statistics configuration: When the user modifies statistics definition, new value are not refreshed on statistics display within population tree. Module "Calculate Data". Bug displaying non-calculated events: Number of non-calculated events displayed could not be the real number of it
Infinicyt™ 1.4. Read more... Manual Analysis Save and Review of Analysis Strategies Smooth of the Reference Image Group tool for label mismatch in Reference Image Select fields to export statistics Diagrams Legend of the Parameter Band DotPlot and Histograms Tile windows Mean and Median representation on APS views Scales on Histograms with several parameters Merge files Dictionary of labels on the Merge tool Change the order of the parameters in the Merge Matrix Merge different types of files with different scales Export a merged file into single original files Report Resize data tables Reference Image on the report Compatibility with Coulter files New Technologies Compatible with Windows 7 Supports 64 bit architectures.
Infinicyt™ 1.3. Read more... Increase in speed of data processing APS Groups separation considering classified events Graphs Usability Gate selection inversion Possibility to reduce the exact number of events to show Tooltip showing the type of graph and the parameters on minimized graphs Gates and selection of events in the Histogram and Parameter Band dot plots Negative values shown in channel 1 of the logarithmic scale Configuration of Mean and Median representation of a group of event The Density Configuration option is included in this same dialogue box. Selection of the entire population by clicking or gating the Mean or Median dot Common parameters marked in the parameters list Reports Information data boxes for added data components Possibility to add information directly from a FCS file Representation by file in Populations Component Parameter Band Dot Plot: Choice to show only information about the parameters with comments Representation by file Invert Files for a faster reconfiguration of the order shown in the axis Other options: "Show dots", "Means of files" or "Medians of files" New action buttons in Merge interface Select the files to be calculated Remove files from the list Group to correct typing mistakes of the labels Help Direct access to Manual Analysis Configure to go to the Controls window Save as Main Menu New advanced module Calculate Data: Calculation of several characteristics of cells in which a parameter has not been directly measured, based on the knowledge of those haracteristics in phenotypically similar cells which have already been measured Advanced Analysis BCR_ABL Fusion Protein Kit
Infinicyt™ 1.2. Read more... Manual analysis Save reference images Creation of new analysis parameters calculated as mathematical functions of parameters present in data files Diagrams: A new option in the toolbar: Diagrams A new type of diagram to represent the results: Box Plot Options to smooth the contour and auto-regulate the maximum value to shown in the histograms Representing density plots with contour lines Show the scale of axes in the Parameter Band Dot Plot It has changed the visualization of the available functions in the Statistic window of the Profile Configuration Comments: Possibility to see the comments associated with a file ($COM) The number and name of the fields of the column "Comments" can be configurated If there are coments, they will be notified by an icon Save analyzed files Save files in anonymous format Option to disable warnings reminding to save the analyzed files when you finish File merge Merge a FCS file with a previously analyzed file (.cyt format) New control icons in the analysis window Options to select how to identify the different tubes merged in the analyzer File export Export the results of the report to XML format Export several linear parameters having the SSC-low transformation applied General options Saving an FCS file with FCS or TXT format
Infinicyt™ 1.1. Read more... The FL-based merger option has been deleted New options and types of Graphs have been created to show information It is possible to create and save Analysis Profiles for successive uses: Statistics It is possible to use formulas to calculate results Absolute counts from the population of reference selected by the user Current compensation can be changed manually and saved if the origin FCS file contains this information internally New option of creating consecutive gates to identify a population and save the sequence to apply it to similar files It is allowed to configure negative visibility of the parameters with Logical scale New option to check all the parameters measured of a data file (Properties) New options to facilitate the Manual Analysis of the data file: It has been improved the way in which the user can save and find in his computer a document already analyzed (.cyt) Option to choose the columns to visualize in the Analysis Window User can configure the mathematical transformation of the parameter SSC to improve the separation of populations New options regarding printed report New options regarding Merger Module New information and commands in the merger screent News regarding merger process controls New options regarding File Export Merge a FCS file with a previously analyzed file (.cyt format) New control icons in the analysis window Options to select how to identify the different tubes merged in the analyzer
Infinicyt™ 1.0. Read more... Basic functions of the Infinicyt software v1.0: File Merge to allow the user to merge flow cytometric data from different files (obtained from different immunostained tubes) into a single file, representing a complete immunostaining protocol of one sample. File Editor, to modify certain parameters on FCS files, such as parameter label or typing corrections. File Export, to allow the analysis with different software. Manual analysis, with multiple options and possibilities for easy handling of the files.

Go to Cytognos website

www.cytognos.com

Cytognos S.L. is a biotechnology company dedicated to the design and development of new reagents, software and techniques that provide innovative solutions in the field of flow cytometry.

Pol. La Serna, Nave 9, CP 37900, Santa Marta de Tormes, Salamanca·(Spain)
Tel: +34 923 12 50 67
Fax: +34 923 12 51 28